Gurgaun

Tumblast Shot blasting machine offered in different sizes, several models and has different utilization for different cleaning and peening purposes. If we have medium-size elements or metal components that need to clean through shot blasting process in bulk or small batches then Tumblast Type Shot Blasting Machine is the most suitable for this work.

Wire comes first in the siphon plug and then in the nozzle, it completely holds the wire. The siphon plug should be cleaned occasionally. Wipe out the grooves and clean out the holes with the proper size wires from the cleaning wire kit. Do not wash the o-rings with a cleaning solvent. Examine them for damage and replace them if required.

Wire flame spray Gun Metco 12E (Metco Metalizing Gun) uses a single wire that is entered in a jet flame. The temperature is close to 10,100 K, melting the wire. The air stream from the jet atomizes the molten particles, falling them onto the substrate.

Sand blasting is basically applied to clean the exterior surface of any metal or component, mainly for the metallic exterior. It is one of the various effective and fast methods which uses compressed air to blast fine sand through a sand blasting nozzle to shape and smooth surface of each different material.

We are Manufacturer of Flame Spray Guns and Supplier of Matco and matco12e flame spray gun and exporter of Flame Spray Guns & Zinc Spray Gun.

The SB 9182 is the ultimate Direct Pressure blast cabinet for small, medium and large size component. The SB 9182 is sheet cut by laser cut and hand welded 12G industrial blasting cabinet. No rivets, all grit stays in the cabinet. With a 1 cubic pressure pot, micro metering valve and ¾” piping.

In Metalizing Gun a Thermal Spraying is a group of coating processes in which finely divided metallic or nonmetallic materials are deposited in a molten or semi-molten condition to form a coating. The coating material may be in the form of powder, ceramic-rod, or wire.

Our Sand Blasting Cabinet is used for cleaning the small and medium components as metal, wood, ceramics, mold, die, casting, glass, etc. Suction Blasting Cabinet can also be used to change the condition of a metal's surface, such as through removing scratches or casting, molds marks.

Sand blasting cabinet shall be a closed-loop system that shall allow the operator to blast and recycle the abrasive (sand). This blast cabinet consists of mainly the following components. Cabinet shall be a closed chamber in which the operator blasts the contact sleeves/connection clamp arrangement from outside by placing his arms in gloves attached to glove holes on the cabinet.

The technique of sand blasting, frequently referred to as abrasive blasting, is used to clean, refinish, and prepare surfaces for a variety of applications. To remove unsuitable coatings, rust, or surface flaws, it offers quickly propelling small particles of an abrasive substance, such sand. This comprehensive guide will offer you with the information and abilities required to produce exceptional outcomes if you're looking to use a sand blasting machine to its maximum ability.